Bearing LM25OP Samick LM25OP Samick bearing Size Chart (mm/inches) |
|---|
| da | 68.263 mm |
| Da | 140 mm |
| Ca | 42.799 mm |
| A1 | 88.9 mm |
| A2 | 133.35 mm |
| S | 4.763 mm |
| ba | 34.131 mm |
| H | 174.625 mm |
| H1 | 88.9 mm |
| H2 | 31.75 mm |
| J min. | 244.475 mm |
| J max. | 279.4 mm |
| L | 330.2 mm |
| N1 | 23.813 mm |
| R1 | 53.181 mm |
| R2 | 21.431 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 31.75 mm |
| Housing | SAFS 516 |
| Stabilizing ring | SR-16-13 |
| Labyrinth ring | 2 x LOR 44 |
| PosiTrac Plus contact element | 2 x B10724-44 |
| End plug (suffix Y) | EPR 8 |
| Max. speed for PosiTrac Plus seal | 2150 r/min |
| P60° | 138 kN |
| P90° | 82.7 kN |
| P120° | 49.8 kN |
| P150° | 44.5 kN |
| P180° | 52.5 kN |
| Pa | 7.83 kN |
| Mass pillow block | 21.3 kg |
| Cap bolt | 2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque | 298.3 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 87.885 g |