Bearing TUP2 220.60 CX TUP2 220.60 CX bearing Size Chart (mm/inches) |
|---|
| Bearing (basic designation) | 23280 K |
| Locating ring | 2 x FRB 10/720 |
| da | 380 mm |
| Ca | 276 mm |
| Da | 720 mm |
| A | 460 mm |
| A1 | 420 mm |
| ATS | 470 mm |
| H | 835 mm |
| H1 | 420 mm |
| H2 | 135 mm |
| J | 1030 mm |
| J1 | 260 mm |
| L | 1220 mm |
| N | 60 mm |
| N1 | 48 mm |
| s | 35 mm |
| ba min. | 215 mm |
| ba max. | 238 mm |
| bb | 210 mm |
| bc | 243.5 mm |
| J6 | 1120 mm |
| N4 max. | 35 mm |
| Labyrinth seal | 2 x TS 88/380 |
| End cover | ETS 88 |
| P0° | 8000 kN |
| P55° | 10000 kN |
| P90° | 4800 kN |
| P120° | 3600 kN |
| P150° | 3100 kN |
| P180° | 4000 kN |
| Q120° | 5800 kN |
| Q150° | 3350 kN |
| Q180° | 2900 kN |
| Mass housing | 709 kg |
| Cap bolt, size | M 42x280 |
| Cap bolt, rec. tightening torque | 850 N·m |
| Appropriate attachment bolt, size G | 42 mm |
| Appropriate attachment bolt, rec. tightening torque | 3640 N·m |
| Eye bolt, size | 2 x M 42 |
| Initial grease fill, 20% | 10.5 kg |
| Initial grease fill, 40% | 14.5 kg |