Bearing 29456 NTN 29456 NTN bearing Size Chart (mm/inches) |
|---|
| da | 49.212 mm |
| Da | 120 mm |
| Ca | 52.807 mm |
| A1 | 79.375 mm |
| A2 | 123.825 mm |
| S | 4.763 mm |
| ba | 36.513 mm |
| H | 157.162 mm |
| H1 | 82.55 mm |
| H2 | 30.163 mm |
| J min. | 206.375 mm |
| J max. | 241.3 mm |
| L | 279.4 mm |
| N1 | 19.05 mm |
| R1 | 44.45 mm |
| R2 | 25.4 mm |
| RG | 1/4 NPT |
| PG | 1/8 NPT |
| h | 36.513 mm |
| Housing | SAF 611 |
| Stabilizing ring | SR-13-11 |
| Contact seal | 2 x B9784-19 |
| Ventilation fitting | 38174-12 |
| End plug (suffix Y) | EPR 5 |
| Max. speed for contact seal | 2950 r/min |
| P60° | 43.1 kN |
| P90° | 25.8 kN |
| P120° | 16 kN |
| P150° | 14.7 kN |
| P180° | 17.8 kN |
| Pa | 6.94 kN |
| Mass pillow block | 13.7 kg |
| Cap bolt | 2 x 1/2-13 UNC |
| Cap bolt recommended tightening torque | 149.1 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.625 in |
| Initial grease fill | 68.04 g |