Bearing S5206-2RS ZEN S5206-2RS ZEN bearing Size Chart (mm/inches) |
|---|
| Category | Mounted Units & Inserts |
| Inventory | 0.0 |
| Manufacturer Name | SKF |
| Minimum Buy Quantity | N/A |
| UNSPSC | 31000000 |
| Weight | 23.171 |
| EAN | 7316570373363 |
| Product Group | M06288 |
| inside diameter: | 85 mm, 100 mm, 110 mm, 95 mm, 4.0000 in, 3.2500 in, 3.9375 in |
| housing material: | Cast Iron |
| base to bore centerline: | 4.9375 in |
| compatible bearing type: | Spherical Roller |
| overall length: | 16.1250 in |
| finish/coating: | Uncoated |
| overall height: | 9.5000 in |
| compatible bearing series/part number: | 1222 K, 2222 K, 23222CCK/W33, C2222 K, 1222, 1319, 1319 K, 21319 E, 21319 EK, 2222, 22222 E, 22222 K, 22319 E, 22319 EK, 2319, 2319 K, 23222CC/W33, C22221222 K 2222 K 2322 |
| overall width: | 6.9375 in |
| bolt center-to-center length: | 13-11/16 in |
| mounting: | Two-Bolt Base |
| base width: | 4-3/4 in |
| housing construction: | Split Pillow Block |
| series: | SNL |
| compatible bore diameter: | 85 mm, 100 mm, 110 mm, 95 mm, 4.0000 in, 3.2500 in, 3.9375 in |
| standards met: | ISO/DIS 185 Grade 200 |
| Locating ring | 2 x FRB 17.5/200 |
| da | 85 mm |
| Ca | 80 mm |
| Da | 200 mm |
| Db | 147.5 mm |
| A | 175 mm |
| A1 | 120 mm |
| H | 242 mm |
| H1 | 125 mm |
| H2 | 45 mm |
| J | 350 mm |
| L | 410 mm |
| N | 32 mm |
| N1 | 26 mm |
| J6 | 378 mm |
| J7 | 44 mm |
| N4 max. | 8 mm |
| A2L | 191 mm |
| A2T | 250 mm |
| d2 | 182 mm |
| Bearing (basic designation) | 22222 K |
| P0° | 600 kN |
| P55° | 680 kN |
| P90° | 410 kN |
| P120° | 310 kN |
| P150° | 275 kN |
| P180° | 340 kN |
| Pa | 220 kN |
| Locating ring | 2 x FRB 13.5/200 |
| Q120° | 620 kN |
| da | 100 mm |
| Q150° | 360 kN |
| Ca | 80 mm |
| Da | 200 mm |
| Q180° | 310 kN |
| Db | 147.5 mm |
| Mass housing | 22 kg |
| A | 175 mm |
| A1 | 120 mm |
| Cap bolt, size | M 20x100 |
| H | 242 mm |
| Cap bolt, rec. tightening torque | 200 N·m |
| H1 | 125 mm |
| Appropriate attachment bolt, size G | 24 mm |
| H2 | 45 mm |
| Appropriate attachment bolt, rec. tightening torque | 665 N·m |
| Initial grease fill, 20% | 530 g |
| Initial grease fill, 40% | 850 g |
| J | 350 mm |
| L | 410 mm |
| N | 32 mm |
| N1 | 26 mm |
| J6 | 378 mm |
| J7 | 44 mm |
| N4 max. | 8 mm |
| A2L | 191 mm |
| A2T | 250 mm |
| d2 | 182 mm |
| P0° | 600 kN |
| P55° | 680 kN |
| P90° | 410 kN |
| P120° | 310 kN |
| P150° | 275 kN |
| P180° | 340 kN |
| Pa | 220 kN |
| Q120° | 620 kN |
| Q150° | 360 kN |
| Q180° | 310 kN |
| Mass housing | 22 kg |
| Cap bolt, size | M 20x100 |
| Cap bolt, rec. tightening torque | 200 N·m |
| Appropriate attachment bolt, size G | 24 mm |
| Appropriate attachment bolt, rec. tightening torque | 665 N·m |
| Initial grease fill, 20% | 530 g |
| Initial grease fill, 40% | 850 g |
| db | 110 mm |