Bearing NUP2217 E CX NUP2217 E CX bearing Size Chart (mm/inches) |
|---|
| Engineering Group | Mounted Bearing |
| Bearing Number | 22217 |
| Shaft Size | 2-15/16 in |
| Shaft Size Type | Imperial |
| Full Timken Part Number | TAPN17K215SB |
| Locking Style | Tapered Adapter |
| Weight | 33 lb |
| Housing Style | Two-Bolt Pillow Block |
| UPC Code | 0883450133128 |
| Dimension A | 3.75 in |
| Dimension B | 7.32 in |
| Dimension C | 4.33 in |
| Dimension D Max | 11.00 in |
| Dimension D Min | 9.50 in |
| Dimension F | 12.63 in |
| Dimension G | 3.0000 in |
| Dimension H | 1.33 in |
| Dimension J (Bolt Size) | 0.750 in |
| Dimension L | 3.47 in |
| Dimension M | 1.96 in |
| Dimension S | 3.23 in |
| C0 - Static Load | 71900 lb |
| C - Dynamic Load (Basic) | 66900 lb |
| e - Geometry Factor | 0.22 |
| Y1 - Geometry Factor | 3.07 |
| Y2 - Geometry Factor | 4.57 |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Oil Lubrication - B/C/O Seal | 1100 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Grease Lubrication - B/C/O Seal | 1100 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0040 in |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Pre Install Clearance Min | 0.0043 in |
| Pre Install Clearance Max | 0.0055 in |
| Int Radial Clearance Reduction Min | 0.0018 in |
| Int Radial Clearance Reduction Max | 0.0025 in |
| Adapter Sleeve Axial Movement Min | 0.027 in |