Bearing 6302LLBNR NTN 6302LLBNR NTN bearing Size Chart (mm/inches) |
|---|
| da | 80 mm |
| db | 92.075 mm |
| dc | 76.2 mm |
| Da | 170 mm |
| Ca | 67.793 mm |
| A1 | 98.425 mm |
| A2 | 160.338 mm |
| S | 4.763 mm |
| ba | 44.45 mm |
| H | 209.55 mm |
| H1 | 107.95 mm |
| H2 | 44.45 mm |
| J min. | 269.875 mm |
| J max. | 320.675 mm |
| L | 361.95 mm |
| N1 | 22.225 mm |
| R1 | 63.5 mm |
| R2 | 26.988 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 42.862 mm |
| Housing | SAF 316 |
| Stabilizing ring | SR-19-16 |
| Labyrinth ring (db shaft position) | LOR 84 |
| PosiTrac Plus contact element (db shaft position) | B10724-106 |
| Labyrinth ring (dc shaft position) | LOR 60 |
| PosiTrac Plus contact element (dc shaft position) | B10724-184 |
| End plug (suffix Y) | EPR 10 |
| Max. speed for PosiTrac Plus seal | 1450 r/min |
| P60° | 85.9 kN |
| P90° | 51.6 kN |
| P120° | 32 kN |
| P150° | 28.9 kN |
| P180° | 34.7 kN |
| Pa | 22.2 kN |
| Mass pillow block | 30.4 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 515.2 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 181.44 g |